Geekworm Raspberry Pi 4 11mm Embedded Heatsink (P165-B), Raspberry Pi 4B Heatsink/Radiator for Raspberry Pi 4 Model B & Pi 4 Expansion Board Support POE Extension


9,99 €
(as of Feb 04,2021 04:43:36 UTC – Details)



Note:
1. This is a new version P165-B embedded heatsink with 11mm thickness.
2. The P165-B embedded heatsink support install the 30mm cooling fan. No cooling fan included in the packing list. 3. Add one piece thermal tape as gift in case you will need. But it is strongly recommend to use the CPU grease(not included) to replace the thermal tape to get better heat dissipation. Due to shipping restrictions, please prepare the CPU grease if you need.
4. The Raspberry Pi 4 board is NOT included in the packing list.

Overview
This P165-B is an upgraded version of P165-A, which is perfectly compatible with POE Extension.
Geekworm design new version embedded armor aluminum alloy heatsink(P165-B) to slove Raspberry Pi 4 excessive heat generation problem when use Raspberry Pi 4 Model B with its expansion board. This heatsink can also be used with a 30mm cooling fan above. The Raspberry Pi 4 POE port is available to use now for the new version.

Key Features:
Only supports Raspberry Pi 4 Model B;
Supports to cooling down the Raspberry Pi 4 board when using the Pi 4 expansion board;
Equipped with only 4pcs M2.5×5+6mm spacers;
Raspberry Pi HAT positioning hole is M2.5 internal thread; (this design is convenient to fix)
Supports the installation of 30mm fans; Cooling fan can be added when the heat dissipation of a single aluminum heat sink is not enough, so that all heat dissipation problems can be solved.
Support POE expansion board, the POE port is available to use.
Heatsink size: 6.5×5.5×1.1cm/2.55×2.16×0.43inch

Packing list
1x 11mm armor heatsink(P165-B)
4x M2.5×5+6mm spacers

New version Geekworm embedded armor aluminum alloy Heatsink (P165-B) is only designed for Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Version, embedded heatsink with 11mm thickness. WIKI for reference: raspberrypiwiki.com/P165
Supports to cooling down the Raspberry Pi 4 board when using the Pi 4 expansion board(also support PoE board); It is compatible with Raspberry Pi 4 expansion board to slove the raspberry pi 4 overheat problem, BUT you will need to prepare the proper standoffs or screws to use the P165-B with other expansion board.
Only equipped with 4pcs M2.5X5+6mm spacers for the P165-B embedded heatsink, you will need to prepare extra standoffs or screws for Raspberry Pi 4 with other expansion boards.
Add one piece thermal tape as gift in case you will need. But it is strongly recommend to use the CPU grease (not included) to get better heat dissipation.
Supports the installation of 30mm fan; Cooling fan can be added when the heat dissipation of a single aluminum heatsink is not enough, so that all Raspberry Pi 4 heat dissipation problems can be solved.